FT44 ball float steam trap
Brief Introduction.FT44 Ball Float Steam Trap, similar to Spirax Sarco Design, mainly used for steam system to drain condensate water,Structural Characteristic
1.The valve adopts two kinds of sealing,e,g,balance double valve seat and single valve seat with reliable closedown and long life.
2.There's always condensate water available in front of the valve with reliable water sealing and non-leakage of steam.
3.No noise before operation in favor of environmental protection.
4.At the beginning of ventilation,all the valves start and lowtemperature condensate water and air are rapidly expelled to greatly shorten the start time for equipment.
5.Internal component is made of stainless steel, corrosion and cavitation erosion proof.Field of Application.Product Name: FT44 ball float steam trap.
Pressure Rating:1.6- 4.0Mpa.
Nominal Diameter:DN32,DN40,DN50.
Body Material:Steel,WCB.
Standard Flanges: DIN, ANSI, JIS, JB79.Main Technical Parameters and Indexes of Performance.
Nominal pressurePN40Maximun design pressure(PMA)40bar g @ 100Maximun design temperature(TMA)300 @ 27.5bar gMinimun design temperature(TMI)-10Maximun upstream pressure for saturated steam service(PMO)32bar g @ 239Maximun operating temperature(TMO)285 @ 28.5bar g
Minimun operating temperature(TMIO)0Maximun differential pressure( PMX )FT44-4.54.5barFT44 -1010barFT44 -1414barFT44 -2121barFT44 -3232barMaximum cold hydraulic test pressure60bar g
Material of Main Component.
Name of componentMaterial of componentValve body, valve coverWCBFloating ballstainless steel
Main ExternalDimensions.
DNA322304023050230