Tyco Potter UL Listed Electronic Supervisory Pressure Switches
The Potter PS10 Series Pressure Actuated Switches are designed for the detection of a waterflow condition in automatic fire sprinkler systems of particular designs such as wet pipe systems with alarm check valves, dry pipe, preaction, or deluge valves. The PS 10 is also suitable to provide a low pressure supervisory signal; adjustable between 4 and 15 psi (0,27 and 1,03 BAR).
1. Apply Teflon tape to the threaded male connection on the device.
(Do not use pipe dope)
2. Device should be mounted in the upright position (threaded connection down).
3. Tighten the device using a wrench on the flats on the device.
TECHNICAL PARAMETER
TypePS10APS40ABoundary Dimension120mm*57mm*111mm120mm*57mm*111mmThread Diameter1/2" (15mm) male screw1/2" (15mm) male screwDefault Setpressure up to 6±1psi(0.42±0.07bar)
pressure down to 5±1psi(0.35±0.07bar)PS40-1A:pressure down to 30psi(2.1bar)
PS40-1A:pressure down to 30psi(2.1bar)Maximum System Pressure1.7Mpa(250psi)1.7Mpa(250psi)Environmental Requirementindoor and outdoor all ok
NEMA4 stipulated shell Temperature
-40ºF/140ºF,-40ºC/140ºC
(dangerous area out of service)indoor and outdoor all ok
NEMA4 stipulated shell Temperature
-40ºF/140ºF,-40ºC/140ºC
(dangerous area out of service)