Fluorescent lamp starters are widely used in different types of fluorescent Lights. The starter is there to help the lamp ight. Our starters have a uniform Qualitt and very comptitive prices due to our pefect processing control through The newest fully automatic assembly and inspection machines. We supply Customers with wide range of starters with its excellent performance of quick Start, longlife, safe, and stable.Features:
Start fast on both high and low voltage
With excellent characteristics
Safety and reliability
With a long life
Conforming to the IEC standardModel: FS-4-2Composition:
PPwhite cover
yellow resinbase
sharpbulb
aluminium nail
mylar condenserFuction :
The gas in the fluorescent tube has a high resistance when not lit, so it takes a high voltage to start it glowing. The "starter" stores energy and releases it all at once, causing a high voltage. once the tube is glowing its resistance is lower, so it can continue to run without the starter.
In fact the mains voltage is much higher than the tube requires to run once the gas inside it has been "lit" by the starter. A special thing called a "ballast" is included in the lamp fitting to reduce the mains voltage to one that is sufficient for the lamp to run continuously without overheating. If there was no ballast in the circuit supplying the lamp, the tube could get hot enough to explode!Applications:
For use with both T8 and T12 tubes ranging from 40W/110-130VUsage Notes:
For maximum tube life replace the starter at the same time as the fluorescent tube
Ensure the power is turned off before replacing the tube and starter