Small Sized Desk Type Pneumatic Hot Melt Machine EquipmentModel:BY-2520RR(QD)ItemDetailed InformationEquipment IntroductionThis equipment has been used in home appliances and medicine and other fields of hot - melt riveting, temperature control by region. Japan MISUSI original heating device. Hot plate temperature control, with self-test, closed-loop control, multi-point independent temperature control, temperature control accuracy up to ±2 degrees.The cooling system is air-cooled by blowing air.Production cycle time 25S-35S.Equipment FeaturesSafety: the machine is equipped with protective grating and scald warning safety baffle.The work table height is 750MM(Sitting position)The quipment starting mode: The equipment is started by pushing two starting buttons together with two hands.Technical ParametersEquipment demension(L)400MM*(W)430MM*(H)900MM.Maximum allowable die size of equipment (L)250MM*(W)200MM*(H)230MM.Electric power requiement: 3 phases 380V 50Hz(If there are special requirements, customer confirmation is required.).The outlet pressure of the air compressor: 4Kg/cm2-6Kg/cm2(0.4MPA-0.6MPA).Adaptable to ambient temperature: -5ºC~40ºCAdaptalbe to humidity : 20%~80%The noise of the transmission part shall not exceed 70 db.