physiotherapy shockwave cellulite therapy machine
Part Introduction
1. Touch screen
2.Function selecting knob & Confirming button
3.Accessory frame
4.SW work handle jack
5.Beat workhead handpiece jack
6.Service brake jack
7.Filter cup with pressure gauge
8.USB jack
9.General power switch
10.Power supply line
Replace Adapter
1 . if you need to change adapters during operating, one hand hold the SW hand, the other hand use "U" shaped of combination wrench to get stuck flat bit of 3# adapter, screw it out by turning it to anticlockwise.
2.Choose 1 or 2 adapter, put it into screw cap, and than install then into SW handle.
tighten by turning them to clockwise. Than use the "O" shaped wrench to fasten the
adapter. Change adapter is finished.
3.When the number of times to reach two million, you need to replace metal tube inside. According to arrow direction to disassembly the handpiece.
4.Using "-" type wrench to disassembly no head fixed screws in middle iron tube. take out metal tube inside and bullet.
5.Put metal tube inside into middle tube well according to picture shows. The notch out
towards. Put the bullet in.
6.Install the middle iron tube well, and adjust the notch direction of metal tube in side.
7. Put into the spring, then install middle iron tube into the end of handle. The last install the adapter well.