Colin SpO2 Sensor Compatinle Nellcor Doc-10
Compatibilities:
Manufacturer | Model | Bitmos | sat 800, sat 801, sat 805, sat 816, satPuls
CAS Med | 511
Cardio Aid | 200
Covidien > Nellcor | N-550, N-560, N-595, N-600, N-600x, Oximeters that require Nellcor OxiMax sensors, N-3000, N-390, N-395, N-6000, NPB-290, NPB-295, Symphony N-3000
Criticare | 506DNV3, 506DNVP3, 506LNV3, 506LNVP3, 506NV3, 506NVP3
DRE | Waveline
Datex Ohmeda | Cardiocap/5, enGuard CM5
Digicare | LW600
Fukuda Denshi | Dynascope DS-7100
GE Healthcare > Critikon > Dinamap | Carescape B650, E-NSAT, Pro 1000, Pro 1000 V3, Pro 200, Pro 300, Pro Series V2, ProCare 200, ProCare 400, ProCare Ausculatory 400, Carescape V100, Dinamap ProCare with Masimo Pro 1000, M-NSAT Modules, Pro 300V2, Pro 400, Pro Series, ProCare, ProCare 300, ProSeries V2, V300
Huntleigh | All
Invivo | Escort II OPT30 Prism, MDE Prism Escort, T8
Masimo | All, Rad-5
Mediana | YM6000
Medtronic > Physio Control | Lifepak 11, Lifepak 12, Lifepak 15, Lifepak 20, Lifepak 20E
Midmark > Cardell | 9403, 9500HD
Mindray > Datascope | Passport 2, Passport V, Accutor V, Accutorr Plus, Accutorr Plus (Nellcor), Accutorr V, Duo, EPM4, Passport 2LT, Passport Duo, Passport Trio, Passport XG, Spectrum, Spectrum OR, Trio, V12, V21
Nihon Kohden | BSM-2300, BSM-2304A, BSM-4100, BSM-4104A, BSM-4114A, BSM-5100
Omron > Colin | BP-S510, T105NXM, BP-306, BP-508, BP-808, BP-88, BP-88S, Press-Mate
Oridion | Capnostream 20
Philips | Prodigy, VS1
Respironics | Alice 5
Welch Allyn | 42NT0-E1 LXi, Spot Vital Signs 42NTB-E1, 45NE0-E1 LX, 53STP, Propaq CS, Spot Vital Signs 42MTB-E1, Spot Vital Signs lXi
Zoll | E Series, M Series, R Series
Technical Specifications:
LEDRed660nm normalLED Wavelength660nm/905nmText RangeOxygen Saturation(%SpO2)0% to 100%Pulse Rate(bpm)30 to 245AccuracySpO2±1%(90~100%)±2%(80~90%)±3%(below 70%)Pulse Rate±2bpm(30-250bpm)Storage and Transport Environment-10ºC~+40ºCOperating Temperature±5ºC~+40ºCOperating/Storage/Transportation Humidity0%-80%Hyperbaric Pressure86kPa-106kPa
All type sensors:
P/NDescriptionConnector ImagineMPS077AColin adult finger clip spo2 sensor,10ft
MPS077BColin adult soft tip spo2 sensor,10ftMPS077CColin pediatric finger clip spo2 sensor,10ftMPS077DColin pediatric soft tip spo2 sensor,10ftMPS077EColin neonate wrap spo2 sensor,10ftMPS077FColin adult ear clip Spo2 sensor.10ftMPS077GColin animal tongue Spo2 sensor,10ftMPS077HColin Multi-site Y type spo2 sensor,10ftMPS077IColin Infant soft tip spo2 sensor, 10ftMPS077JColin Multi-site Y type with foam,10ftMPS077KColin Multi-site clip spo2 sensor, 10ft
What is spo2?
SpO2 is a measurement of the amount of oxygen attached to the haemoglobin cell in the circulatory system. Put simpler, it is the amount of oxygen being carried by the red blood cell in the blood. SpO2 is given in as a percentage, normal is around 96%. The "S" stands for saturation.
Very simply: SpO2 Goes up and down according to how well a person is respiring (breathing) and how well the blood is being pumped around the body, however, like most things in physiology it is more complicated than this.
This information is provided as an aid to understanding medical lingo and in no way replaces proper training.
How to test a SpO2 sensor without those expensive equipment(like Spo2 Analyzers or similar)?
You can use a simple multimeter to check the pins of Spo2 sensors' connector, to get the configuration of it,
In it, two pins are for detector and 3 for I.R and L.E.D, You put your meter of resistance option and check, on L.E.D checking it also blink the red light, on the others, it will show only 0.666, something like that.
Cleaning step:
1, Turn off the oximeter before cleaning.
2, Wipe exposed surfaces with a soft cloth or a pad moistened with a mild detergent solution or medical alcohol (70% isopropyl alcohol solution)
3, Clean inside of the elastic thimble and two optical elements with a cotton swab or equivalent moistened with a mild detergent solution or medical alcohol (70% isopropyl alcohol solution), Ensure without dirt or blood.
Attention:
1, Keep the sensor dry before using. The rubber inside of the Spo2 sensor belongs to medical rubber, which has no toxin and no harmful to the skin of human being. Spo2 Sensors can be cleaned and disinfected with same solutions.
2, Replace the batteries timely when battery indication is low. Please follow the law of the local government to deal with used battery.
3, Remove the batteries from the battery cassette if the Oximeter will not be operated for a long time.
4, Recommended that keep the oximeter in a dry environment anytime. A wet ambient might affect its lifetime and even might damage the oximeter
Caution: Do not spray, pour, or spill any liquid on the oximeters, their accessories, switches or openings.
Payment:
Transportation Methods:
warranty:
1, Reusable spo2 sensors are carried 12 months warranty to repair for free due to the quality problems since ex-factory;
2, ECG cable and leadwires, spo2 adapter cable, EKG cable are carried 6 months for free (excluding disposable spo2 sensor), but including the misuse, negligence or accidents causing from the buyer.
Return:
For all warranty return items, prior authorization to return merchandise must be obtained by contacting SZMEDPLUS. If the items are not covered under warranty, customer is responsible for all shipping fee 25% restocking fee.
Contact information:
Company:Shenzhen Medplus Accessory Co.,LTD
Contact: Jenie Wei