500 watt outdoor led driver used for 500w led outdoor light
1. The features of 500 watt outdoor led driver:The output mode:Constant voltage;Design:Noise free & flicker;Technology:Using active built-in PFC technology;Effiency:>92;Power factor>0.98;Protection:Short Circuit Protection / Over Voltage Protection / OCP;Waterproof ProtectionAluminum silicone gel potted waterproof IP67 protection;Heat dissipation modeNature coolingInstall:Easy to installCertificates:CE/ROHS/ETL/SAA/TUV passed.2. Specifications of500 watt outdoor led driver
(1)Basic parametersModelVGD-CV-500WOutput Voltage24V / 36V / 48VVoltage Precision±0.5VOutput Current21A / 14A / 10.5AOutput Power500W(Max)Line Regulation1%Input Voltage Range100-277V/AC(standard) 90VAC(min)305V/AC(max)AC Current(Typ)4.831A@100VAC 3.945A@110VAC 1.891A@230VAC 1.628A@264VACFrequency Range47-63HzPFC(Typ)>0.98 @ full loadFull-loading Efficiency90%@full load
(2)Protection of 500 watt outdoor led driverShort CircuitShort circuit protection / Over voltage protectionOver Voltage<305VAC
(3)Environment of500 watt outdoor led driverOperation Temperature-40~+60 ºCOperation Humidity20~90%Storage-40~ +85 ºC, 10~95%RHTemperature Coefficient±0.03%/ ºC (-45~50 ºC )Vibration Resistance10~500HZ,2G 10Min/period,X , Y , Z line per 60 mins
(4)Safety&EMCof500 watt outdoor led driverStandardRefer to EN 61347-1;EN 61347-2-13; EN 62493Withstand VoltageI/P-O/P:3.75KVACInsulating StrengthI/P-O/P:400M Ω/500 VDC/25 ºC /70%RHEMC EmissionTo Correspond EN55015,EN61000-3-2( >= 50% load)EMC ImmunityTo Correspomd EN55015,EX61000-4-2,3,4,5,6,8,11,A Level of light industry standard(Surge 4KV)
(5) Other information of500 watt outdoor led driverWeight3000GDimension260*120*55mm ( L*W*H)PCB94V-0 PC fire retardantColorDark GreyPacking44*28*18cm/10pcs
(6) Note
All parameters are measured at normal temperture(25-28 ºC )
1. Ripple & Noise are measured at 20KHz of bandwidth by using a 12" twisted pair-wire teminated with a 0.1 uf & 47uf parallel capacitor(@ full load).2.The efficiency measured at Max output voltage,and 230VAC with full load,if with 110VAC the efficiency will be lowered 0.5%~1.5%;Working 1~2 hours,efficiency will be higher 1.5%~1%than the initial stage.3.Mechanical Specificationof500 watt outdoor led driver
4.Power Factor Characterisics & THD Characteristicsof500 watt outdoor led driver
5.Efficiency & Load of (110VAC / 230VAC)of500 watt outdoor led driver
6. Certificates of Outdoor led driver
7. The picture of prodcution workshop & production line
8. The application of LED drivers
Welcome your visiting to our factory.