Super Heavy Duty Dry Battery, Carbon Zinc C Carbon Zinc Battery, 1.5V Battery manufacturer / supplier in China, offering Super Heavy Duty Dry Battery C/R14/Um2, 36V Lithium Ion Skateboard 36V 4.4ah Electric Skateboard Battery, Durable Factory Price 1.5V R6 AA Um3 Super Heavy Duty Carbon Zinc Dry Battery and so on.
Min. Order / Reference FOB Price | |
---|---|
1 Pieces | Contact Supplier |
Local Area: | Shenzhen, Guangdong, China |
---|---|
R&D Capacity: | OEM, ODM, Other |
Payment Terms: | LC, T/T, PayPal |
Type: | Lithium Ion Battery |
---|---|
Rated Capacity: | 10ah |
Working Life: | 5 Years |
Battery group specifications
Cell
model
GLP10Ah-7768256
Capacity(0.5C)
≥10Ah
rated voltage(V)
3.2V
Typical Impedance (mΩ)
≤5mΩ
Battery material
NMC cathode material
PACK
Combination method
1P12S
Minimal capacity(0.5C)
10Ah
Nominal voltage
36V
Max. charge voltage
43.8V
Discharge cut-off voltage
≤30V
Max Charge current
5A(0.5C)
Max Working current
15A(1.5C)
Standard charge current
0.3C
Standard charge current
0.5C
Pack Impedance standard
≤100mΩ
Weight (Approx.)
4.2Kg
Max. dimension(LxWxH)(mm)
76*107*380
Operatingtemperature
Chargetemperature
0ºC~45ºC
Dischargetemperature
-20ºC~60ºC
BMS
Single cell over-charge cut-off voltage
3.7V
over-chargereleasevoltage
3.6V
Single cell under-dischargecut-offvoltage
2.5V
Dischargereleasevoltage
2.7V
Over-discharge cut-off current
40A
Over-discharge cut-off current delay
1.5S
Short-circuit protection
100A
Short-circuit protection delay
500uS
Condition for the recovery ofover-current andShort-circuit
Balance current
40-50mA
Balance Condition
3.6
Caution:
1.Do not dismantle,open or shredthebatteries.
2.Do not expose batteries to heat or fire.Avoid storage in direct sun light.
3.Do not short-circuitthebattery,Do not store batteries haphazardly in a boxor drawer where they maybe short-circuited by other metalobjects.
4Forbid confusedly using the charge socket and discharge socket,oraccidentsmayoccurred.
5.Do not subject batteries to mechanical shock.
6.In the event of a cell leaking,do not allow the liquidtocome in contact with the skin oreyes.If contact has been made,wash the affected area with copious amounts of waterand seek medical advice.
7.Observe the plus (+) and minus (-) marks on thebattery and equipment and ensurecorrect use.
8.Keep batteries out of the reach of children.
9.Keep batteries clean and dry.
10.Wipe the battery terminal s with a clean dry cloth if they become dirty.
11.Batteries need to be charged before use.Always use the correctcharger and refer to the manufacturer's instructions or equipment manual for propercharging instructions.
12.Do not leave a battery on prolonged charge when not in use.
13.After extended periods of storage,itisnecessary to charge and discharge the batteries several times to obtain maximum performance.
14.The batteries give their best performance when they are operated atnormal room temperature (20 °C ± 5 °C).
15.Retain the original product literature for future reference.
16.Use only thebattery in the application for which it was intended.
17When possible,remove the battery from the equipment when not in use.
18.Dispose of properly.
19.Cells used as E-motor or storage power should be matched with controller or related equipment..Becausethe battery piles are matched with protection board,you can not drive the pure inductanceequipmentotherwise you could damage the whole system.